Make Your Own Field Hockey Goal
Field hockey is a popular sport in the United States and requires a specific set of equipment, including a field hockey goal. However, buying a brand new field hockey goal can be expensive. Fortunately, making your own field hockey goal is a great alternative that can save you a lot of money. In this article, we will guide you on how to make your own field hockey goal.
Materials Needed
Before we dive into the process of making the goal, you need to gather the necessary materials. The following is a list of materials you will need:
- Two PVC pipes, 1 ½ inch in diameter and 10 feet in length
- Four PVC elbow joints, 1 ½ inch
- Two PVC T-joints, 1 ½ inch
- Two PVC end caps, 1 ½ inch
- A hockey net
- A drill
- A saw (hacksaw or PVC cutter)
- A measuring tape
- A marker
Step-by-Step Instructions
Once you have gathered all the necessary materials, follow these step-by-step instructions to make your own field hockey goal:
- Begin by cutting the PVC pipes into the following lengths:
- Two pipes measuring 4 feet 2 inches each
- Two pipes measuring 6 feet 2 inches each
- Two pipes measuring 1 foot 6 inches each
- Two pipes measuring 1 foot 3 inches each
- Take two of the 6 feet 2 inch pipes and attach one elbow joint to each end, making sure they are facing the same direction.
- Attach the two 4 feet 2 inch pipes to the open ends of the elbow joints.
- Insert two T-joints into the open ends of the 4 feet 2 inch pipes, making sure they are facing the right direction.
- Insert the two 1 foot 6 inch pipes into the T-joints.
- Attach an elbow joint to the end of each 1 foot 6 inch pipe, facing each other.
- Insert the two 1 foot 3 inch pipes into the elbow joints.
- Attach the two end caps to the ends of the 1 foot 3 inch pipes.
- Repeat steps 2-8 to create the second half of the goal.
- Connect the two halves together using the T-joints and 1 foot 6 inch pipes.
- Drill two holes into each side of the goal, about 6 inches from the top. These holes should be large enough to fit a zip tie through.
- Attach the hockey net to the goal using zip ties.
Tips and Tricks
In order to create a perfect field hockey goal, here are some tips and tricks:
- Make sure the PVC pipes are cut to the exact length specified in the instructions.
- Use a PVC cutter instead of a hacksaw for a cleaner cut.
- Drill the holes for the zip ties before attaching the hockey net to the goal.
- Zip tie the net tightly to the goal to prevent it from moving during gameplay.
- Use duct tape to cover any exposed PVC edges to prevent injury.
Conclusion
Making your own field hockey goal can be a fun and rewarding experience, especially when you see the final product being used in gameplay. By following the step-by-step instructions and tips provided in this article, you can create your own field hockey goal at a fraction of the cost of buying one. So, gather your materials and get building!
