Diy Hockey Drying Rack With Fan
As a hockey player, it is essential to keep your gear clean and dry. A well-maintained equipment not only lasts longer but also prevents bacteria growth and bad odor. Drying racks are the perfect solution for air-drying your equipment after every game or practice. However, a typical drying rack may not dry your gear completely, leading to the growth of bacteria and mold. To overcome this issue, you can make a DIY hockey drying rack with a fan. In this article, we will discuss how to make a hockey drying rack with a fan.
Materials Required
To make a DIY hockey drying rack with a fan, you will need the following materials:
- Wire Mesh
- Wooden Beams
- Zip Ties
- Screws
- Nuts and Bolts
- Fan
- Extension Cord
All the materials can be easily found in a hardware store. You may add or remove materials depending on your preference.
Step-by-Step Instructions
Let's get started with making a DIY hockey drying rack with a fan. Follow these step-by-step instructions to make a perfect drying rack:
Step 1: Cut the Wooden Beams
Firstly, you need to cut the wooden beams according to your desired rack size. Cut four vertical posts, two horizontal beams for the top, and two side beams using a saw. Make sure the dimensions are correct, and the rack can fit all your equipment.
Step 2: Assemble the Frame
Secondly, assemble the frame by attaching the vertical posts to the horizontal beams using screws and nuts. Make sure the frame is strong enough to hold all the equipment. You may use zip ties to secure the mesh wire around the frame.
Step 3: Secure the Fan
Thirdly, secure the fan to the side beam using nuts and bolts. Place the fan in a way that it can circulate air throughout the rack. You may also add an extension cord to connect the fan to a power outlet.
Step 4: Install the Wire Mesh
Fourthly, install the wire mesh inside the frame using zip ties. Make sure the mesh is secure and can hold all the equipment. You may place a towel underneath the rack to catch any water dripping.
Step 5: Place the Equipment
Lastly, place all your equipment on the rack, making sure there is enough space between each item. Turn on the fan, and let it dry for a few hours or overnight.
Conclusion
In conclusion, making a DIY hockey drying rack with a fan is an easy and cost-effective way to keep your equipment clean and dry. With a few basic materials and step-by-step instructions, you can make your drying rack in no time. Remember to clean your equipment before storing it on the rack and turn on the fan for a few hours after every game or practice. Happy playing!
